Service Engine Soon Light
Had the codes scanned got cam sensor problem. Starts and idles rough, but not stalling or hesitation. What part do i replace to fix this problem.
Codes P0171 and P0300
My Buick Lesabre has these codes for lean and misfire. We have replaced the O2 sensor and fuel filter. Could this be a fuel pressure problem?
Car Repair Questions- Buick LeSabre
1998 Lesabre Won't Start
My car wont start. I did a computer scan but there are no codes. Would a bad ignition coil cause this problem?
1997 Sputters And Dies Out
1 i have a 1997 buick lesabre replaced the head gaskets and up it started just fine. Just needed to jump battery. Ran and got code random misfire and random misfire cylinder #6. Replaced ign. coils and replaced battery now wont start. It cranks just fine getting fuel and getting spark. It wants to start but wont, any ideas out there.
Buick 3800 Oil Pressure Light Always On
My car was leaking antifreeze from the intake manifold gasket.
My mechanic replaced the gasket and plenum. He also replaced the PCV valve and replaced the oil pan gasket which was slowly leaking.
He flushed and filled the radiator, replaced all the oil and filter.
3800 cam Sensor Replaced Three Times
The 1990 Buick 3800 was a car my father purchased 10 years before his death and I have repainted and restored to like new and drive it daily. Problem is the cam sensor I have replaced 3 times.
More Car Repair Help
© Copyright 2006