2000 Olds Alero 3.4 v6.
Question: all the gauges just stopped working have checked fuses.

Answer:
If there were other electrical problems with the car, i would suspect a bad ignition switch or fuse block/junction block problem. But this would have to be a problem in the PCM, the Class II data wire from the PCM to the cluster, or an internal cluster problem.

Gauges are sent data on the Class II line and the cluster interprets the data. A scanner that can read inputs to the cluster would be need to see if the PCM is sending data. And diagnosis of the data line for an open or short to ground.
2000 Oldsmobile Alero Gauges Stop Working
My 2001 Alero Service Vehicle Soon Light on Dash
I recently had the
Service Vehicle soon light come on. So i look in the booklet that came with it and was wondering if it was the Automatic Lighting Control...
Change Spark Plugs on 2.2l  Engine
Like to change the spark plugs but don't have any idea on how to tackle the coil over plug system. Could you give me some tips...
Oldsmobile  Ignition Key Problem Security Flashing
UPON TRYING TO EXIT THE CAR, THE KEY
WOULDN'T TURN TO THE OFF POSITION, ONLY TO ACCESSORIES, AND THE KEY WOULDN'T COME OUT.

THE NEXT DAY...
Brake Light Problem, Service Vehicle SoonWhy does my left and right brake lights don't work but the middle brake light does.  There doesn't appear to be...

More Car Repair Help



Contact Us © Copyright 2006 . GreatAutoHelp.com