My 1998 Chevy Monte Carlo.
Question = I'm looking for directions on how to program my keyless entry for my 1998 Monte Carlo Z34 please help me.
In the right side of the trunk, behind the side carpet trim, there is the programming connector. Ground that wire, the locks will lock then unlock t o verify it is in learn mode.
Next, press and HOLD the lock and unlock button at the same time. The locks will lock then unlock to verify the remote has been learned.
Un ground the connector, then test the remote
A few other Chevy questions.
2000 CHEVY MONTE CARLO 3800 V6.
SERVICE ENGINE SOON A SCAN FOUND NO OBD II CODES.
Repairs done prior = ENGINE WAS CLEANED, FRONT HUB ASSEMBLIES WERE CHANGED.
There are many different computer systems on todays cars. The service ENGINE indicator is strictly powertrain computer related. Service VEHICLE codes are stored in the body control module. The service VEHICLE indicator can be caused by several different systems. Anything from vehicle lighting, to theft system, to body control module(BCM) to ABS (but usually an ABS light as well), powertrain non-emissions related codes, or communications problems between any of these computers.
Most inexpensive scanners only read the powertrain computer. In order to read codes that set a service VEHICLE light ... MORE
How To Program Chevy Monte Carlo Remotes